PERMANENT WALL PADDING
Plywood Backed Wall Mats - A permanently mounted plywood backed pad with the standard 1” vinyl covered lip at the top and bottom for easy installation. We do not use particle board for backing in any of our products. The panels are 2’ wide and up to 8’ in height. Five and six foot heights are the most common. Custom sizes are available. Prices upon request.
M017-010 Prime 2” polyurethane foam 100+ILD
M017-020 Polyethylene 1 3/8”
M017-030 Bonded foam 2” 4 lb
M017-040 Bonded foam 2” 6 lbPrices upon request, please Fax, Phone or E-Mail..
INNOVATIVE ‘Z’ CLIP MOUNTING
'Z’ Clip Mounting System - This series offers a padding system that is easier to install and remove, if necessary, than the above. The top 1” lip has been replaced by our exclusive ‘Z’ clip mounting system. This mounting system eliminates any unsightly mounting hardware or trim at the top of the pad for a clean smooth look. Individual panels are easily removed for future service or vinyl repair. Prices upon request
M017-050 Prime 2” polyurethane foam 100+ ILD
M017-060 Polyethylene 1 3/8”
M017-070 Bonded foam 2” 4 lb
M017-080 Bonded foam 2” 6 lbPrices upon request, please Fax, Phone or E-Mail.
Sewn Wall Mats/Velcro - These pads are used in combination with our exclusive Velstrip wall mounting units to make mounting and removal a breeze. Double stitched sewn construction can be made up to 4’ X 6’. Easier to install than A or B above. Velcro loop sewn on back mounts onto Velstrip attached to wall at top and bottom. Prices upon request.
M017-090 2” Polyurethane 100+ ILD
M017-100 Polyethylene 1 3/8”Prices upon request, please Fax, Phone or E-Mail.
Velstrip Mounting System - 14 oz vinyl sheaths and 2” wide velcro with a 20 gauge sheet metal insert for strength and fastening. The vinyl sheath will match the pad color. Simply mount the VelStrip on the wall with an appropriate anchor (provided by customer or installer) and attach the pads to the VelStrip.
M017-105 Wall mounting strip.Prices upon request, please Fax, Phone or E-Mail.